DIATEX provides a wide range of bagging films for vacuum moulding and vacuum infusion.
DIATEX provides a wide range of bagging films for vacuum moulding and vacuum infusion.
DIATEX provides a wide range of bagging films for vacuum moulding and vacuum infusion.
DIATEX provides a wide range of bagging films for vacuum moulding and vacuum infusion.
DIATEX provides a wide range of bagging films for vacuum moulding and vacuum infusion.
VACUUM INJECTION AUXILIARIES
DIATEX offers a range of fittings, valves, adapters and consumable hoses for vacuum infusion.
This range of fittings and valves is available in several diameters to cover all needs.
PLUGS
Product : ACINFUSION50/PLUG12 To reduce leak risks and manufacturing costs, Diatex developped a new range of plastic connectors. Diameter : 12 mm 50 unit bags
Product : ACINFUSION54/PLUG16 To reduce leak risks and manufacturing costs, Diatex developped a new range of plastic connectors. To use with Diadrain. Diameter : 16 mm 50 unit bags
Product : ACIGSPIR12-14/PLUG12 Spiral plug is used to reduce leak risks and manufacturing costs. Diameter : 12 mm Plastic plug To use with : Spiral 50 unit bags
Product : ACIGSPIR14-17/PLUG16 Spiral plug is used to reduce leak risks and manufacturing costs. Diameter : 16 mm Plastic plug To use with : Spiral 50 unit bags.
INFUSION PLUG Éco 8, specific connector for DIADRAIN. Compatible with the LDPE 06-08 pipe. For the smaller parts, the Infusion Plug Eco 8 can be used directly on the INFUPLEX. Compatible with the LDPE 06-08 pipe The Infusion Plug Eco range has been redesigned in an Eco-responsible and Economical way : Weight gain divided by 3.6 including wood load
The INFUSION éco range has been re-designed with an eco-responsible and economical approach. 80% less plastic used compared to a traditionnal connector; addition of fillers of vegetable origin (vine branch) Infusion Plug Eco are specific connectors for vacuum infusion, compatible with both PEHD 10-12 and PEBD 10-12 pipes.
INFUSION PLUG Éco 16 is a specific connector for DIADRAIN, designed in an eco-responsible and economical way . Weight gain divided by 3.6 including wood load (reeds) Compatible with the PEBD 14-16 pipe. For the smaller parts, the Infusion Plug Eco 16 can be used directly on the INFUPLEX.
The SPIRALPLUG Eco range has been designed with an Eco-responsible and Economical approach: 80% less plastic used compared to a traditional connector Addition of fillers of vegetable origin (reed; vine shoots) SPIRALPLUG Eco are specific connectors for vacuum or resin. With their Ω shape, they can be clipped directly onto adapted spiral tubes. (see graphic bellow) In the upper part, their internal conical shapes allow an easy insertion and a good tightening to facilitate the installation of t
The INFUSION éco range has been re-designed with an eco-responsible and economical approach. 80% less plastic used compared to a traditionnal connector; addition of fillers of vegetable origin (vine branch) Infusion Plug Eco are specific connectors for vacuum infusion, compatible with both PEHD 10-12 and PEBD 10-12 pipes.
The SPIRALPLUG Eco 16 have been re-designed with an eco-responsible and economical approach: 80% less plastic used compared to a traditional connector Addition of fillers of vegetable origin (reed; vine shoots) SPIRALPLUG Eco are specific connectors for vacuum or resin. With their Ω shape, they can be clipped directly onto adapted spiral tubes. (see graphic bellow) SPIRALPLUG Éco 16 can be clipped directly onto size 12-14 or 14-17 resin feed ramps : Spiral tubes, SpiralNet, SpiralPlex, Diabre
VACCUUM AND RESIN INJECTION CHANNELS
DIATEX offers a range of flat resin and resin infusion lines for vacuum infusion processes.
Translucent spiral tubing.
SPIRALPLEX is a remote resin infusion line. When using a spiral tube as a resin channel, one of the biggest issues is the marking of the laminate after infusion. To eliminate this problem, DIATEX has developed a ready-to-use solution: the SPIRALNET. SPIRALPLEX is a release agent for direct application to composites. SPIRALPLEX combines a spiral tube with an INFUPLEX to optimise resin distribution and avoid marking the laminate during the infusion process. Advantages: no marking on the laminat
When using a spiral tube as a resin line in vacuum infusion process, one of the biggest issues is the marking of the laminate. In order to get rid of this problem, DIATEX developed a ready to use advanced solution : SPIRALNET. This product combines a tube mesh together with a spiral tube in order to optimize the resin distribution and avoid the marking of the laminate during the infusion process. Includes spiral tube & mesh Easy to use. No marking of the laminate. Standard supply: rolls of 50m
SPIRAL MP is a microporous vacuum channel used for vacuum infusion parts manufacturing. SPIRAL MP is made of a spiral tube wrapped in the PES90MP microporous peel ply. To reduce marking, you can use the microporous DIADRAIN MP. Very fast implementation of vacuum channels Very flexible. Easy to cut to size.
DIABREAKER is a vacuum line made of a non-woven polyester filled with thermoplastic microspheres, laminated with a release film, and holding a spiral tube which maintains the vacuum all along the product. DIABREAKER avoids over-consumption of resin by slowing down the resin as soon as the flow front gets into contact with it, while keeping the resin moving forward, and maintaining a good vacuum level. DIABREAKER allows to drain entrapped air bubbles, to get fully infused fibers, Thanks to ELA20
DIADRAIN is a flat resin or vacuum channel. It consists of a three-dimensional polyester filament core structure wrapped in a non woven polyester sleeve. Works as resin supply channel or vacuum channel in vacuum infusion process. Flexible. Easy to cut to size.
DIADRAIN / PA80 is a flat resin or vacuum channel to avoid marking parts manufactured by vacuum infusion : contrary to the pipes, it does not mark. It is made of a three-dimensional polyester filament core, wrapped in a non-woven polyester sheath, itself wrapped in a PA80 tear-off fabric sheath to facilitate removal. Works as resin supply channel or vacuum channel in vacuum infusion process. Flexible. Easy to cut to size
DIADRAIN MP is placed around the mold instead of the spiral pipe: when the resin reaches DIADRAIN MP, it is stopped meanwhile the gas is still eliminated from the laminate. DIADRAIN MP can also be set at any place on the laminate. Very fast implementation of vacuum channels Flexible. Easy to cut to size.
ASSEMBLY ADHESIVE SPRAY
DIATEX offers a range of assembly adhesive sprays for vacuum infusion processes.
INFUTAC is made for the assembly of dry reinforcements and vacuum devices in vacuum infusion and RTM processes. Holding of hybrid materials Optimal adhesion during the molding Low drying shrinkage Exact application thanks to ultrafine spraying and green tracer High instantaneous adhesion INFUTAC adhesive, made for vacuum infusion process, ensures a perfect tack of the reinforcements during the molding. The glue does not interfere on the surface quality and structural integrity.
MEGATAC adhesive is made for the assembly of dry reinforcements and vacuum devices in vacuum infusion and RTM processes. The glue has a powerful bonding force. The high adhesive strength of MEGATAC glue allows the application of numerous fabrics and cores (foam, balsa wood…). ADVANTAGES : Available in spray : WEB type spraying, low volatility. Powerful bonding force No degradation/alteration of the glue due to freezing. Heat the glue to room temperature before use. Do not place/store the glue
FOGTAC : Glue for infusion and RTM FOGTAC glue, intended for the vacuum infusion and RTM injection process, ensures perfect adhesion of the various reinforcements during draping. It has a powerful bonding force which limits consumption. With its misting effect, the evaporation of solvents is facilitated and makes it possible to quickly obtain a tack on the surface of the reinforcements, while limiting the quantity deposited between the different layers. FOGTAC glue does not interfere with res
INFUTAC CLEAR (transparent) is available in 500 ml sprays. INFUTAC GREEN (green color) is available in 500 ml sprays and 22 L canisters.